• An fab. 1999

Private sale. Small, easy-to-operate round baler with twine binding; bale size: 110 cm in diameter x 120 cm in height. We look forward to hearing from you! bale chamber: Fixed bale chamber Hay and forage equipment Round balers

• An fab. 1994
• 420 cm

Used machine with the following features: * Cat. 1/2 swivel mount * Power take-off shaft with slip clutch * Single-acting hydraulic lift * 4 rotor discs, each with 6 tines * Working width 420 cm * Outer rotors can be folded into transport position * Balloon tires * Mechanically adjustable boundary spreading device We

• 15 m³

The loader wagon is in excellent condition - wide axle - 11.5/80-15.3 agricultural tires - hydraulic pickup lift - hydraulic brake - no drive shaft - Lighting The machine is sold "as is" without any warranty or guarantee. We look forward to your inquiry! wagon-type: loader-wagon, Number of axles: 1 axle, Rear flap, Scrap

• 400 cm

This rotary hay tedder is in generally good condition and is equipped with a hydraulic lift, swivel arm, feeler wheel, and power take-off shaft. This is a private sale. You can find the phone number in the photos. Stop by and see our extensive selection for yourself. Height adjustment: Hydraulic height adjustment, Attac

• An fab. 2023
• 350 cm

Robust single-rotor rake from InterTech, the ZKT 350 - In-stock machine, manufactured in 2023 InterTech ZKT 350 single-rotor rake - Working width 350 cm - Tandem chassis - Three-point hitch Cat I & Cat II - Ground-following wheel - Mechanically folding swath belt - Mechanical height adjustment via hand crank - Net wei

• An fab. 2005
• 14282 h

Well-maintained round baler with * 14-knife cutting unit * Net tying * Central lubrication * Wide-angle PTO shaft * User-friendly controls * Tires: 500/50-17 NEW * Pickup in very good condition * Cutting rotor in very good condition * Drive chains like new * Total number of bales: 14, 282 We look forward to your inquir

The Unigrip M+ bale grapple was developed to deliver outstanding performance in dense stacking and efficient bale retrieval. It is designed for bales with a diameter of 120 to 160 cm. Its clever construction incorporates numerous unique design features that contribute to the exceptional performance of Quicke’s Unig

• 24 m³

Used Mengele LW 210 Quadro forage wagon in ready-to-use condition! * approx. 24 m³ * hydraulic pick-up * hydraulic articulated drawbar * loading unit with split arms * Cutting unit (accommodates up to 12 blades) * Power take-off shaft * Scraper floor * Mechanical tailgate * Support wheel * Available immediately Th

• 445 cm

Krone KW 4.45/4 rotary tine tedder, in operating condition and with the following specifications: * Working width: 445 cm * Three-point hitch, Categories I & II, * PTO shaft with slip clutch * Hydraulically foldable EW * 4 rotors, each with 6 double tines * Swivel bracket lockable for road travel * Spread angle adjus

This bale transport fork is sold as-is, ready for use, with a three-point hitch and adjustable tubes. We have many other silage bale transport devices in stock. Stop by and see our extensive selection for yourself. We look forward to your inquiry! Bale attachment: Single Hay and forage equipment Bale transporters

• An fab. 2024

Used Stekro bale grapple with Weidemann-Fuchs mounting. This bale grapple is equipped with 1 DW cylinder. Weight: approx. 200 kg; opening width: approx. 160 cm. 1DW control unit required In very good condition, available immediately Stop by and see our extensive selection for yourself. We look forward to your inquir

• An fab. 2025
• 2 h
• 320 cm

Alpin Front-Mounted Disc Mower, Fully Equipped - Working width: 3, 165 mm - Transport width: 3, 000 mm - 5 mowing discs, 2 mowing drums - Low curb weight: approx. 685 kg - Cat. 1/2 swing-type hitch - Hydraulic side shift: 30 cm (1x DW required) - Adjustable coil spring mower beam relief - Drive train: PTO shaft-gearbox

• An fab. 1997

Used Tanco 3-point baler in ready-to-use condition! * Category II 3-point hitch * Hydraulically swiveling roller arms for picking up and depositing bales * Both rollers are driven by a hydraulic motor * 2 bale guide rollers * 500 mm film pre-stretching unit * Automatic control via operator terminal * Automatic film c

• An fab. 2026

Mürztaler Bale Grabs Special Offer * With bale pick-up * Particularly gentle bale handling via the grapple frame and base frame. * Secure bale grip via a double-acting hydraulic cylinder with a locking block. * Optimal quick-change system for attachments, ensuring the most versatile use. * Suitable for all round bal

• An fab. 2005
• 240 cm

Used Krone AM 243 S Rear Mower * Year of manufacture: 2005 * Working width: 240 cm * 6 mowing discs * Foldable protective cover * Hydraulic lift (1xEW required) * Includes PTO shaft * Mechanical collision protection The mower is in working condition and is being sold as-is, as traded in by the customer. We look forw

Foldable Bale Spear for Front and Rear Hydraulics with Three-Point Hitch and Weiste Triangle Mount * Complete with large bale tines (length: 1100 mm, M22 x 1.5) * Comes standard with three-point hitch and mount for tractor triangle, Categories 1 and 2 * With bolts * Foldable tines * Tine spacing: 660 mm * Load capacit

• 210 cm

Used Mörtl FTL 210 disc mower in need of repair. The mower was in use until recently and is being sold as shown in the pictures. The frame is cracked. The transmission is operational. Protective covers and a tarp are included. With hydraulic side shift The machine is being sold as traded in by the customer, without

• An fab. 2010
• 280 cm

For Sale by Owner! Used Krone Am 283 S rear mower in good condition. * Year built: 2010 * Working width: 280 cm * 7 mowing discs * Foldable protective cover * Hydraulic lift (1xEW required) * Includes PTO shaft * Mechanical collision protection * Quick-change blades * Available immediately Located at the customer

• An fab. 2007
• 280 cm

The mower is ready for use and is being sold "as is, " without warranty or guarantee. A test run is available upon inspection. * Working width: 280 cm * Conditioner with steel tines * 2 conditioner speeds, 600–900 rpm * Quick-change blades * Power take-off (PTO) shaft We look forward to hearing from you! type of disc m

MS 100 Messerschleifer mit Kühleinrichtung * Messerschleifer mit fahrbarem Untergestell * Funktioniert für alle Ballenpressen- Ladewagen- und Silierwagenmesser * Schleifwinkel und Radius sind stufenlos einstellbar * Kein Adapter notwendig * Stufenlos einstellbar * Werkzeugloser Messerwechsel * Seitliche Dre

Professional-grade equipment at an introductory price!! PRODUCT DETAILS • Base frame with Category 1 and Category 2 three-point hitch • Quick-release mechanism for mechanical width adjustment • For bale diameters from 1.00 to 1.80 m • Weight: 95 kg • Maximum bale weight: 1, 500 kg We look forward to your inquiry! Bale

• 540 cm

This is a used machine in working condition and is sold without a warranty. The Pöttinger HIT 54 N is a 4-rotor rotary rake with a working width of approximately 5.4 m and is one of Pöttinger’s classic mounted tedders. This model is characterized by its robust construction and efficient operation, making it ideal for f

• An fab. 2011
• 282 cm

The Fella SM 2870 ISL rear-mounted disc mower, manufactured in 2011, is a high-quality, high-performance machine that is in exceptionally good condition (Condition Class 1). With 0 operating hours, it is practically brand-new and offers a working width of 2.82 meters, making it ideal for efficiently mowing large areas.

• An fab. 2026

Profi-Dreipunktwickler mit Vollausstattung zum Einführungspreis!! * Made in ITALY * * Geeignet für Ballendurchmesser bis 150 cm * stabiler Doppelrahmenträger für Wickelarm * Dreipunktanbau Kat. II * Hydraulisch schwenkbare Walzenarme zur Aufnahme und Ablage der Ballen * Beide Walzen sind jeweils über einen Hydrom

• An fab. 2026

Profi-Dreipunktwickler mit Vollausstattung zum Einführungspreis!! * Made in ITALY * * Geeignet für Ballendurchmesser bis 150 cm * stabiler Doppelrahmenträger für Wickelarm * Dreipunktanbau Kat. II * Hydraulisch schwenkbare Walzenarme zur Aufnahme und Ablage der Ballen * Beide Walzen sind jeweils über einen Hydro

• An fab. 2001

Private Sale Used Krone Vario Pack 1500 MC round baler with cutting unit, as follows: * Control terminal – user-friendly operation * Net wrapping * Approx. 18, 300 bales * Tires: 15.0/55-17 * Variable bale chamber for bale diameters from 0.9 to 1.50 m * Bar chain elevator * 17-blade rotor cutting unit with cam-ope

• An fab. 1983
• 20 m³

Used Mengele LW 210 Quadro forage wagon, ready for use! * Approx. 20 m³ * Hydraulic pick-up * Loading unit with 2 arms * Cutting unit with 5 blades (7 blades possible) * Power take-off shaft with overload protection * Scraper floor * Mechanical tailgate * Tires: 11.5/80-15.3 * Support wheel * Available immediately

• An fab. 2026
• 270 cm

Sip Favorit A 275 F Alp rake in the following configuration: * Working width: 270 cm * Overall width: 315 cm * Net weight: 353 kg * 5 tines per row (5 rows) * PTO speed: either 540 or 1000 rpm (both pulleys and belts included) * Spring-loaded pendulum mounting bracket * Adjustable lower link pins * Tires: 15x6.00-6 *

• An fab. 2026
• 250 cm

Sip Favorit A 235 F Alp Bandrechen in folgender Ausführung: * Arbeitsbreite 250 cm * Außenbreite 295 cm * Eigengewicht 344 kg * 5 Zinken pro Reihe (5-reihig) * Zapfwellendrehzahl wahlweise 540 oder 1000 U/min (beide Riemenscheiben mit Riemen dabei) * gedämpfter Pendel-Anbaubock * verstellbare Unterlenkerzapfen

• An fab. 2026
• 230 cm

Sip Favorit A 235 F Alp Bandrechen in folgender Ausführung: * Arbeitsbreite 230 cm * Außenbreite 275 cm * Eigengewicht 334 kg * 5 Zinken pro Reihe (5-reihig) * Zapfwellendrehzahl wahlweise 540 oder 1000 U/min (beide Riemenscheiben mit Riemen dabei) * gedämpfter Pendel-Anbaubock * verstellbare Unterlenkerzapfen

• An fab. 2026
• 1014 cm

Krone Vendro 1020 Kreiselzettwender in folgender Ausführung: * 10, 14m Arbeitsbreite * ca. 2, 90m Transportbreite * 10 Kreisel mit je 5 Zinkenarme * erforderliche Hydraulikanschlüsse: 1x EW + 2x DW * Krone OptiTurn Zinken mit dreidimensionaler Form und ungleichlangen Zinkenschenkeln * werkzeuglose Streuwinkelvers

• An fab. 2023
• 210 cm

New Molon 210/4 belt rake in the following configuration: * Working width: 210 cm * Transport width: 240 cm * Weight: only 245 kg * 4 rows of double tines * 540 rpm * Pneumatic tires * Convenient height adjustment * Adjustable and fold-up swath cloth * Power take-off shaft available for an additional charge (Illust

• An fab. 2026

New PROFI fixed-chamber baler with * 17-blade cutting unit * Individual blade protection against foreign objects * Hydraulically lowerable blade cassette for quick removal of blockages * Blade group control for flexible adaptation to all harvesting conditions * Roller feed press * Uncontrolled EasyFlow pick-up (2, 150

Stekro Doppeltransportrahmen inkl. 2 Stück Rundballen-Transportgabeln. Mit diesem Ballenträger können Sie den ersten Ballen aufnehmen und dann über den hydraulischen Aushub nochmals aufheben, damit Sie bei der Aufnahme des zweiten Ballens den ersten nicht beschädigen. * zum Transport für zwei ungewickelte oder ge

• An fab. 2026
• 400 cm

Neuer Sip Star 400/11 Schwader in folgender Ausführung: - Schwenkbare 3-Punkt-Anhängung Kat. I&II - inkl. Tastrad - Gelenkwelle mit Rutschkupplung & Freilauf - Schwadtuch - Anpassung der Arbeitshöhe mechanisch - Sip-Tandemachse - Arbeitsbreite (m): 4.00 - Schwadbreite (m): 0.70-1.40 - Zinkenträger am Rotor (

• An fab. 2025
• 350 cm

New SIP Star 350/8 Alp single-rotor rake with the following specifications: * Working width: 350 cm * Transport width: 168 cm * Swivel mount * Tandem axle * Guide wheel * 8 removable tine carriers, each with 4 double tines * Weight: approx. 417 kg * Rotor height adjustment via hand crank * Power take-off shaft with o

• An fab. 2026
• 380 cm

Krone Swadro S 380 Einkreiselschwader. Neumaschine in folgender Ausführung: * Arbeitsbreite 3800 mm * Transportbreite ca. 1850mm * Eigengewicht ca. 530 kg (Grundausstattung) * Kreiseldurchmesser 2960 mm * Zehn Zinkenarme, davon fünf klappbare Zinkenarme * Vier Doppelzinken 10 mm pro Arm mit großem Windungsdurc

• An fab. 2026
• 350 cm

Neumaschine in folgender Ausführung: * Arbeitsbreite 350 cm * Eigengewicht nur ca. 465 kg (Grundausstattung) * Kreiseldurchmesser 270 cm * Zehn Zinkenarme, davon fünf klappbare Zinkenarme * Vier Doppelzinken 10 mm pro Arm mit großem Windungsdurchmesser und „Lift-Effekt“ * Dreipunktanbau Kat. II (montierbar in 2

• An fab. 2024
• 260 cm

Neumaschine! Leichtzügiges Heckmähwerk mit 2, 60m Arbeitsbreite in serienmäßiger Ausstattung mit: - Heckanbau Kat. 1/2 - Verstellmöglichkeiten beim Anbaubock zum bestmöglichsten Anbau an das Trägerfahrzeug - hydr. Klappung/Hochstellung (1 x EW) - Keiriemenantrieb - Klingenschnellwechselsystem - mechanische Anfahrs

• An fab. 2007
• 260 cm

Used front-mounted mower in good condition * Working width: 260 cm * 2 mowing discs, 2 mowing drums * Light weight: approx. 516 kg * Weiste triangle mounting * Pendulum frame with center-of-gravity suspension * Power take-off shaft * Side protective curtains, manually foldable * Quick-release blade fasteners * Witho

• An fab. 2026
• 760 cm

Krone Swadro TC 760 Plus in the following configuration: * Working width 680–760 cm, hydraulically adjustable (1xDW required) * Swath width approx. 100–180 cm * Transport height: 357 cm (tine arms folded) * Rotor diameter: 330 cm * 2 × 13 tine arms (6 foldable) * Power requirement: approx. 50 PS * Required hydraulic

• An fab. 2007
• 320 cm

KRONE Heckmähwerk Easy Cut 320 in guten Zustand und sofort einsatzbereit * Arbeitsbreite 320 cm * Klingenschnellwechsel * vorderer und seitlicher Schutz klappbar * Gelenkwelle * Fünf Mähscheiben, zwei Mähtrommeln * Mittelschwadablage * Leistungbedarf ab ca. 65PS abhängig von Erntebedingungen und Eigengewicht vom

• An fab. 2026
• 300 cm

Neumaschine-Ausstellungsgerät! Leichtzügiges Frontmähwerk mit 3, 00m Arbeitsbreite in serienmäßiger Ausstattung mit: - Frontanbau Kat. 1/2 - viele Verstellmöglichkeiten beim Anbaubock zum bestmöglichsten Anbau an das Trägerfahrzeug - Gelenkwellenantrieb - Klingenschnellwechselsystem - Reserveklingen - Hochklappbar

• An fab. 2025
• 350 cm

Neumaschine unbenützt in serienmäßiger Ausstattung mit: - starren Anbaubock Kat. 1/2 - Gelenkwelle mit Rutschkupplung - hydraulische Klappung - 4 Kreiselteller mit je 5 Zinken - Arbeitsbreite 350 cm - Transportbreite 220 cm - Gewicht ca. 270kg Weitere Modelle in verschiedenen Größen und Ausführungen auf Anfra

• An fab. 2026
• 220 cm

Lightweight rear mower with a 2.20 m working width, equipped as standard with: - Category 1/2 rear hitch - Adjustable mounting bracket for optimal attachment to the carrier vehicle - Hydraulic folding/lifting (1 x EW) - V-belt drive - Quick-change blade system - Mechanical collision protection and overload protection

• An fab. 2026
• 600 cm

Ideal geeignet auch für kleinere Traktoren oder größere Mähtracs. Neumaschine unbenützt in serienmäßiger Ausstattung mit: * Schwenkbock Kat. 1/2 * Dämpfungsstreben * Gelenkwelle mit Rutschkupplung * hydr. Aushebung einfachwirkend * 6 Kreiselteller mit je 5 Zinken * Arbeitsbreite 600 cm * Transportbreite 285 cm

• An fab. 2025
• 260 cm

New stock machine available now! Lightweight Sip front mower with a 2.60 m working width, standard equipment includes: * Category 1/2 front mounting * Power requirement: approx. 50 hp or more * Numerous adjustment options on the mounting bracket for optimal attachment to the carrier vehicle * Mounting bracket with c

Prillinger Ballentransportgabel für den Front und Heckanbau in folgender Ausführung: * Serienmäßig mit Dreipunktaufnahme * für Wickelballen * Kat. 1 und 2 mit Bolzen * Tragarme seitlich verstellbar * mit gerundetem Transportarmen * Tragfähigkeit 1000kg * Eigengewicht 76kg Wir freuen uns auf Ihre Anfrage! A