• 3 m³

This is a private sale; the dump truck is in very good condition - Cargo bed length: 340 cm - Bed width: 170 cm - Side panel height: 40 cm - Bed height: only 88 cm - Mechanical brakes - Wooden side panels We look forward to hearing from you! On top attachment: Steel, Number of axles: 1 axle, dumper-type: 3 sided dumper

• 2 m³

This is a private sale; the trailer has been rebuilt and is in top-notch condition - Cargo area length: 280 cm - Cargo area width: 150 cm - Side panel height: 35 cm - Platform height: only 65 cm - Side panels and floor made from new formwork panels - Interior floor made of sheet metal We look forward to hearing from y

• 6 m³

Fuhrmann tandem dump truck in good condition, bridge dimensions: 4.5 x 2.2 m - Payload approx. 10 metric tons (unfortunately, no nameplate available) - 2 tipping cylinders - Sidewall height: 60 cm - Rear grain slide - Lighting system has been replaced - Tires: 355/60R18 - Hydraulic brakes We look forward to your inqui

This is a set of 6 original John Deere front weight plates, each weighing 50 kg. We look forward to hearing from you! Tractor equipment and accessories Front weights

• An fab. 1998

The front loader was in use until recently; it features - Euro mount - Parallel guidance - 3rd control circuit - Multi-coupler upper section - Cylinders are leak-free - Compatible with Hauer “N” upper frame console (narrow version) The machine is sold “as is, ” without warranty or guarantee. We look forward to your inq

This bale grapple has a grapple opening of 118 cm, is ready for use, and weighs approximately 180 kg. The equipment is sold "as is, " without any warranty or guarantee. We look forward to your inquiry! Hay and forage equipment Bale handlers

This is a complete set of wheels in like-new condition, compatible with Steyr Kompakt Series tractors and also suitable for New Holland T4 and T5 Series tractors; see the following dimensions: * Front: 11.2R24 Michelin AGRIBIB with adjustable rims, center bore 250 mm, bolt circle diameter 285 mm, 6-hole * Rear: 12.4R3

Drying unit complete with Spindler fan, including frequency converter (speed-controlled). Air duct for 2 connections flanged directly to the fan. Optionally available with 2 containers (30 m³) featuring a perforated metal floor and dual air connections at the rear for an additional charge. We look forward to your inq

This is a new, unused lift system being sold on behalf of a customer. IME ESH HWB 3441 Wireless, hydraulic, mobile wheel-grip lift system with a lifting capacity of 8.5 metric tons per column Wireless connection between the columns 4 lifting stands with touch displays; operable from any column Adjustable wheel clamps

The Unigrip M+ bale grapple was developed to deliver outstanding performance in dense stacking and efficient bale retrieval. It is designed for bales with a diameter of 120 to 160 cm. Its clever construction incorporates numerous unique design features that contribute to the exceptional performance of Quicke’s Unig

• An fab. 2003
• 1000 cm
• 600 l

This is a private sale; the machine is being sold due to a change in operations. It is in very good condition, with a boom width of 10 meters, 4 sections, and a manual wash tank. The machine has a valid inspection certificate. Stop by and see our extensive selection for yourself. We look forward to hearing from you! Co

• 25 CP/18 kW
• An fab. 2026
• 80 h

Weidemann 1280 Farm Loader demonstration model in the following configuration: * 25 PS, 3-cylinder water-cooled Perkins diesel engine * Emission Standard V, NO ADBLUE, no particulate filter, and no DOC * Hydrostatic all-wheel drive, 0–20 km/h, divided into 2 speed ranges, selectable via joystick * Tires: 31x15.50-15

• 24 m³

Used Mengele LW 210 Quadro forage wagon in ready-to-use condition! * approx. 24 m³ * hydraulic pick-up * hydraulic articulated drawbar * loading unit with split arms * Cutting unit (accommodates up to 12 blades) * Power take-off shaft * Scraper floor * Mechanical tailgate * Support wheel * Available immediately Th

• 350 cm

Used Sip Spider 350 with the following features: * Three-point hitch * Power take-off shaft * Mechanical lift * 4 rotor discs, each with 4 tines * Working width: 350 cm * Pneumatic tires * Safety bar Stop by and see our extensive selection for yourself We look forward to hearing from you! Height adjustment: Mechanic

• 1 CP/1 kW
• 70 cm

Used Rocker Circular Saw with PTO Drive Cat. 1 Three-Point Hitch Circular saw blade, 70 cm diameter with spare blade Tilting table, spring-loaded Power take-off shaft included for an additional 200.-- Stop by and see our extensive selection for yourself We look forward to your inquiry! saw-type: Rocker circular saw, p

• 80 cm

Lightly used bale tipper with Euro mount and 3 tines Tine length approx. 100 cm We have many other front loader attachments in stock Stop by and see our extensive selection for yourself We look forward to hearing from you! Tractor equipment and accessories Front loader - attachments

Jinpeng Tuk Tuk with Metal Box Body Maximum speed: 25 km/h Range: approx. 40 km Payload: approx. 200 kg We have additional models in stock Stop by and see our extensive selection for yourself We look forward to hearing from you! drive type car/truck: Automatic transmission Cars and motorbikes Other cars and motorbik

Reliable Efco SA 2062 Backpack-Mounted Professional Leaf Blower Key Technical Specifications: Displacement: 61.3 cm³ Power: 3.3 kW (4.5 PS) Weight (dry, without hose): 9.4 kg Fuel tank: 2.3 L Max. air volume: 1, 200 m³/h (approx. 20 m³/min) Max. air velocity: 90 m/s Idle speed: approx. 2, 100 rpm We loo

• 3 CP/2 kW
• An fab. 2022

Professional backpack brush cutter in excellent condition—includes cutting head and 3-prong blade Displacement: 50.6 cm³ Power: 2.3 kW (approx. 3.1 PS) at 9, 500 rpm Weight (without cutting equipment): 12.1 kg Fuel tank: 0.8 l Cutting width: 46 cm Shaft length: 1, 483 mm Shaft diameter: 28 mm The unit i

• 6 CP/4 kW
• An fab. 2024
• 300 h

Very nice Husqvarna chainsaw, manufactured in 2024 Displacement: 59.8 cm³ Power: 3.5 kW (approx. 4.7 PS) at 9, 600 rpm Weight (without bar/chain): 6.1 kg Fuel tank: 0.65 L Oil tank: 0.33 L (adjustable oil pump) Bar length: 45 cm Chain pitch: 3/8″ Chain speed at max. power: approx. 21.4 m/s We look forw