Bauer K46 Kombifass

Slurry tanker with excellent features
• Self-supporting hot-dip galvanized steel tank, 4,600-liter capacity, Ø1,250
• Swing-out tank bottom
• Continuous angle frame with axle adjustment holes
• Blind flanges on the front right and left, quick coupler on the rear left
• Central drawbar with K80 under-mount coupling, support wheel
• Cranked axle, 8-hole, axle square 80 mm
• Tires: 560/45R22.5 BKT FL630
• Two-line air brake system including ALB regulator via fill level indicator
• STARKES transmission unit with compressor and high-pressure centrifugal pump M540K / B63K,
3 switch positions: pump/compressor/combination; can also be used as a pump station
• 2" pressure relief valve with drain hose
• Overflow protection in the dome with spring-loaded dome cover acting as a secondary pressure relief valve
• Original Bauer galvanized siphon, 3 liters, DN 60
• Suction connection HK159/6" with vent valve and quick-connect coupling mounted front left
• Hydraulic distribution gate valve with gas spring cylinder (1xEW)
• 2 bell-type gate valves (suction + distribution)
• Slurry spreader—hydraulic with a wide horizontal and vertical swivel range
(2xDW), with detachable nozzle
• Level indicator
• Hose hooks on both sides
• 3-chamber lighting with galvanized protective cover
• Passivation of galvanized components
• Suction line 6", split (2m hose to quick coupler + 3.5m pipe with 60° elbow)
• Wide-angle flexible shaft with shear bolt
• Drag hose/shoe preparation at the rear of the drum body
• Front pressure connection 4" (T-fitting with end cap and shut-off valve)
We look forward to your inquiry!

Slurry tanker with excellent features • Self-supporting hot-dip galvanized steel tank, 4,600-liter capacity, Ø1,250 • Swing-out tank bottom • Continuous angle frame with axle adjustment holes • Blind flanges on the front right and left, quick coupler on the rear left • Central drawbar with K80 under-mount coupling, support wheel • Cranked axle, 8-hole, axle square 80 mm • Tires: 560/45R22.5 BKT FL630 • Two-line air brake system including ALB regulator via fill level indicator • STARKES transmission unit with compressor and high-pressure centrifugal pump M540K / B63K, 3 switch positions: pump/compressor/combination; can also be used as a pump station • 2" pressure relief valve with drain hose • Overflow protection in the dome with spring-loaded dome cover acting as a secondary pressure relief valve • Original Bauer galvanized siphon, 3 liters, DN 60 • Suction connection HK159/6" with vent valve and quick-connect coupling mounted front left • Hydraulic distribution gate valve with gas spring cylinder (1xEW) • 2 bell-type gate valves (suction + distribution) • Slurry spreader—hydraulic with a wide horizontal and vertical swivel range (2xDW), with detachable nozzle • Level indicator • Hose hooks on both sides • 3-chamber lighting with galvanized protective cover • Passivation of galvanized components • Suction line 6", split (2m hose to quick coupler + 3.5m pipe with 60° elbow) • Wide-angle flexible shaft with shear bolt • Drag hose/shoe preparation at the rear of the drum body • Front pressure connection 4" (T-fitting with end cap and shut-off valve) We look forward to your inquiry!

Slurry tanker with excellent features • Self-supporting hot-dip galvanized steel tank, 4,600-liter capacity, Ø1,250 • Swing-out tank bottom • Continuous angle frame with axle adjustment holes • Blind flanges on the front right and left, quick coupler on the rear left • Central drawbar with K80 under-mount coupling, support wheel • Cranked axle, 8-hole, axle square 80 mm • Tires: 560/45R22.5 BKT FL630 • Two-line air brake system including ALB regulator via fill level indicator • STARKES transmission unit with compressor and high-pressure centrifugal pump M540K / B63K, 3 switch positions: pump/compressor/combination; can also be used as a pump station • 2" pressure relief valve with drain hose • Overflow protection in the dome with spring-loaded dome cover acting as a secondary pressure relief valve • Original Bauer galvanized siphon, 3 liters, DN 60 • Suction connection HK159/6" with vent valve and quick-connect coupling mounted front left • Hydraulic distribution gate valve with gas spring cylinder (1xEW) • 2 bell-type gate valves (suction + distribution) • Slurry spreader—hydraulic with a wide horizontal and vertical swivel range (2xDW), with detachable nozzle • Level indicator • Hose hooks on both sides • 3-chamber lighting with galvanized protective cover • Passivation of galvanized components • Suction line 6", split (2m hose to quick coupler + 3.5m pipe with 60° elbow) • Wide-angle flexible shaft with shear bolt • Drag hose/shoe preparation at the rear of the drum body • Front pressure connection 4" (T-fitting with end cap and shut-off valve) We look forward to your inquiry!